| Booth Dimensions |
| -Internal Size(L×B×H) | Preparation :7000×4000×2800mm
Painting booth :7000×4000×2800mm
Drying booth :7000×4000×2800mm |
| -External Size(L×B×H) | 7120×15500×3460mm |
| Foundation and Floor |
| -Loading Capacity
of Galvanized Grating | 650KG/ wheel, |
| - Surface Area | 27M²( Full Galvanized Grating gills)×3unit |
| - Metal Basement | 800mm Height( should be need to dig foundation ) |
| - Drive-in Ramps | NO |
| Wall and Door |
| - Steel Wall and Roof Panel | Double Construction
with Insulations EPS 60mm |
| -Thickness | with Insulations EPS 50mm |
| -Folded Entrance
Door With
Safety Glass Window | 3200×2700 mm (B×H) -2unit |
| -Operator’s Door
With Safety ,
Glass Window | 800×2000 mm (B×H) 2PCS |
| Lighting |
| - Side Lightings | Preparation :24 Units, each 4×58W, Total 1392W
Painting booth :32 Units, each 4×58W, Total 1856W
Drying booth :4 Units, each 2×58W, Total 464W |
| - Brightness | Preparation :>800 Lux, IP54 Grade
Painting booth :>1000 Lux, IP54 Grade
Drying booth :>300 Lux, IP54 Grade |
| Filtration |
| - Prefilters | Fiberglass,Paint-Stop-Filters
Plate type duel filters |
| - Ceiling Filters | EU5 Fine Filters, 6 Units |
| - Floor Filters | Fiberglass, Paint-Stop-Filters |
| Ventilation System (1 Unit Preparation ) |
| -Direct Drive
Motor (Fresh Air) | 1×5.5KW,970RPM,380V,50HZ motor
certification:CE |
| -Direct Drive
Motor (Exhaust Air) | NO |
| - Fan Capacity | 18000m³/h |
| - Air Flow Speed | +/- 0.15m/s |
| Ventilation System (1Unti Painting booth ) |
| -Direct Drive
Motor (Fresh Air) | 1×7.5KW,970RPM,380V,50HZ motor
certification:CE |
| -Direct Drive
Motor (Exhaust Air) | 1×7.5KW,970RPM,380V,50HZ Domestic
motor certification:CE |
| - Fan Capacity | 25000m³/h |
| - Air Flow Speed | +/- 0.28m/s in an empty booth |
| Ventilation System (1 Unit Drying booth ) |
| -Direct Drive
Motor (Fresh Air) | 1×7.5KW,970RPM,380V,50HZ motor
certification:CE |
| -Direct Drive
Motor (Exhaust Air) | NO |
| - Fan Capacity | 25000m³/h |
| - Air Flow Speed | +/- 0.28m/s in an empty booth |
| Heating System (1Unit Painting booth ) |
| - Heating Exchanger | Stainless Steel 1Gr18Ni9Ti |
| -Heating
Exchange Capacity | 1×200KW(260.000kcal/H) RIELLO |
| -Max. Drying Temperature | 80 °C |
| - Heating time | 3-5 min (from 20 to 60°С)
by Drying Phase |
| Heating System ( 1Unit Drying booth ) |
| - Heating Exchanger | Stainless Steel 1Gr18Ni9Ti |
| -Heating
Exchange Capacity | 1×200KW(260.000 kcal/H) RIELLO |
| -Max. Drying Temperature | 80 °C |
| - Heating time | 3-5 min (from 20 to 60°С)
by Drying Phase |
| -Heating Type | Diesel |
| Control Board |
| -Control system | Stander control
Delta Depressurization
start system EN60204-1-2006 |
| -Function | Spraying ,baking, warming
spray paint, emergency
stop switch |
| -PLC | yes |
| -Import element | master device import element |
| -Overpressure Manometer | yes |
| - Alarm equipment | yes |
